这是描述信息

COATINGS

You are here:
Homepage
/
/
/
xPro*-Si
  • xPro*– Ti  


    Coating properties:

    Coating material Microhardness Coefficient of friction Max. service temperature Color of coating

    xPro* - MN

    HV 0.005 µ  
    2.300 0.4 600 Gold



    Range of applications:

    xPro* - MN Most well-known PVD – hard coating for wear protection of tools in machining and forming as well as for plastic processing



    Application areas:

    /product/6/
  • xPro*-MN  


     

    Coating properties:

    Coating material Microhardness Coefficient of friction Max. service temperature Color of coating
     TiN HV 0.005 µ  
    2.300 0.4 600 Gold



    Range of applications:

    xPro-MN

    Most well-known PVD – hard coating for wear protection of tools in machining and forming as well as for plastic processing,improve the lubricity and wear resistant .



    Application areas:

    /product/11/
  • xPro*-Ti  


     

    Coating properties:

    Coating material Microhardness Coefficient of friction Max. service temperature Color of coating

    TiN Advanced

    HV 0.005 µ  
    3.000 0.4 800 Gold



    Coating properties:

    xPro-Ti This coating is based on TiN base composite coating, the hardness is far higher than common titanium nitride, for the specificity of coating composition and structure, particularly suitable for all kinds of tool that high temperature alloy, steam turbine industry and blade material which broaching and milling .



    Application areas:

    /product/12/
  • xPro*-MC  

    Coating properties:

    Coating material Microhardness Coefficient of friction Max. service temperature Color of coating

    TiC,N

    HV 0.005 µ  
    2.800 <0.35 < 500 Pink/light blue-grey



    Coating properties:

    xPro-MC Compared to TiN higher hardness and lower friction, for machining abrasive and tough materials such as cast steel, Cu – and Al – alloys,stainless steel or for drawing dies.

     



    Application areas:

    /product/13/
  • xPro*-AT  


    Coating properties:

    Coating material Microhardness Coefficient of friction Max. service temperature Color of coating
      HV 0.005 µ  
    xPro*- AT 3.300 0.4 900 Bluish black
    xPro*- AT PT 3.300 <0.4  900 Bluish black



    Range of applications:

    xPro*- AT Very high microhardness, high warmhardness, suitable for extremly high-stressed tools, particularly WC – tools for turning and milling of very hard and difficult-to-machine materials
    xPro*- AT PT Properties as AlTiN, however, improved cutting properties by dedicated posttreatment of surface, improved chip flow



    Application areas:

    /product/7/
  • xPro*-AT 


     

    Coating properties:

    Coating material Microhardness Coefficient of friction Max. service temperature Color of coating

    AlTiN

    HV 0.005 µ  
    3.300 0.4 900 Bluish black



    Range of applications

    xPro-AT Very high microhardness,high warmhardness suitable for extremely high-stressed tools, particularly for rough and finishing maching high hardness duplex stainless steel and ustenite stailless steel,suitable for WC-tools for turning,milling and gear cutting coating.



    Application areas

    /product/14/
  • xPro*-AT PT  

    Coating properties

    Coating material Microhardness Coefficient of friction Max. service temperature Color of coating

    AlTiN PT

    HV 0.005 µ  
    3.300 < 0.4 900 Bluish black



    Range of applications

    xPro-AT PT  Properties as AlTiN,however, improved cutting properties by dedicated posttreatment of surface,improved chip flow particularly suitable for the tools of maching very hard and difficult-to machine materials.



    Application areas

    /product/15/
  • xPro*-PEAK   


     

    Coating properties

    Coating material Microhardness Coefficient of friction Max. service temperature Color of coating

    AlTiN

    HV 0.005 µ  
    3.300 0.3 900 Purple black



    Range of applications

    xPro-PEAK Very high microhardness,high warmhardness, Particularly suitable the tool for gear cutting coating that automobile, motorcycle industry etc .



    Application areas

    /product/16/
  • xPro*-TAC  


     

    Coating properties

    Coating material Microhardness Coefficient of friction Max. service temperature Color of coating

    AlTiN

    HV 0.005 µ  
    3.200 0.15 900 anthracite



    Range of applications

    xPro-TAC  Very high microhardness,high warmhardness, Very low coefficient of friction, particularly suitable for the tools of maching aluminium alloys and stainless steeld materials.



    Application areas

    /product/17/
  • xPro* - AC   
     
        

     

    Coating properties:

    Coating material Microhardness Coefficient of friction Max. service temperature Color of coating
    xPro* - AC HV 0.005 µ  
    3.300 <0.4 1100 Dark steel grey



    Range of applications

    xPro*-AC Highoxidation resistance, high warm hardness, best wear protection for turning,milling and gear dry cutting with high speed on stainless steel, hightemperature alloy and hard cutting material, also for hot-forming, and casting dies.

     

    /product/8/
  • xPro*-AC   

     

    Coating properties

    Coating material Microhardness Coefficient of friction Max. service temperature Color of coating

    AlCrN 

    HV 0.005 µ  
    3.300  0.4 1.100 Dark steel grey



    Range of applications

    xPro-AC High oxidation resistance,high adhesion, high warmhardness, under without wear, suitable for the tools of maching heat-resisting alloy and difficult-to machine materials.best wear protection for turning,drilling milling and gear cutting. also for hot-forming.



    Application areas

    /product/18/
  • xPro*-ACT200   


     

    Coating properties

    Coating material Microhardness Coefficient of friction Max. service temperature Color of coating

    AlCrTiN

    HV 0.005 µ  
    3.300 <0.4 1.000 steel grey



    Range of applications

    xPro-ACT200

    excellent oxidation resistance and warmhardness, Mainly suitable for the tools for turning and milling, and other high-speed cutting of high temperature alloy, stainless steel and other senior hardness material

     



    Application areas

    /product/19/
  • /product/9/
  • Coating properties

    Coating material Microhardness Coefficient of friction Max. service temperature Color of coating

    CrN

    HV 0.005 µ  
     1,800 0.4 750 Silver-grey
     

     

    Range of applications

    CrN With high hardness, abrasion resistance and corrosion proof, low friction coefficient and good surface lubrication performance, Used in non-ferrous metal materials; Composite fiber material turning, milling, drilling gear cutting tool and the workpiece forming coating, also suitable for processing plastic products


    Application areas

    /product/20/
  • Coating properties

    Coating material Microhardness Coefficient of friction Max. service temperature Color of coating

    CrN

    HV 0.005 µ  
    1700 0.15 700 silver-gray


    Range of applications

    xPro-RC Abrasion resistance and corrosion proof, low friction coefficient and good surface lubrication performance, Mainly suitable for all kinds of requirements that lubricating mould and auto parts low temperature coating.


    Application areas

    /product/21/
  • xPro* - Si   
     


    Coating properties

    Coating material Microhardness Coefficient of friction Max. service temperature Color of coating
     xPro*-Si HV 0.005 µ  
    3.550 <0.4 1300 Dark copper



    Range of applications

    xPro*-Si Mainly for high speed dry or wet turning, milling, drilling and gear cutting for hard and composite material for automotive and aircraft industry.



    Application areas

    /product/10/
  • xPro-Si  
     


    Coating properties

    Coating material Microhardness Coefficient of friction Max. service temperature Color of coating

    TiSiN

    HV 0.005 µ  
    3.550 0.4 1100-1300 Dark copper



    Range of applications

    xPro-Si Mainly for high speed dry or wet turning, milling, drilling and gear cutting for hard and composite material for automotive and aircraft industry.



    Application areas

    /product/22/
  • xPro-Si-PLUS 


    Coating properties

    Coating material Microhardness Coefficient of friction Max. service temperature Color of coating
       AlTiSiN HV 0.005 µ  
    3.500 0.4 >1100 Dark copper



    Range of applications

    xPro-S-PLUS Mainly for high speed dry or wet turning, milling, drilling and gear cutting for hard and composite material for automotive and aircraft industry.



    Application areas

    /product/23/
  • xPro*-STAR   


    Coating properties

    Coating material Microhardness Coefficient of friction Max. service temperature Color of coating

    AlCrTiSiN

    HV 0.005 µ  
    3.550 0.4 1300 Dark pink

     



    Range of applications

    xPro*-STAR Mainly for high speed dry or wet turning, milling, drilling and gear cutting for hard and composite material for automotive and aircraft industry, machining hardness up to HRc70 after coating.



    Application areas

    /product/24/
  • xPro* - STAR-HTC 70 


    Coating properties:

    Coating material Microhardness Coefficient of friction Max. service temperature Color of coating
      HV 0.005 µ  
    xPro*- STAR HTC 70 3.500 <0.3 1300 Dark copper

     



    Application:

    xPro*-STAR HTC 70

    Mainly for high speed dry or wet milling, specially for machining stainless steel, Ti-alloy and high temperature alloy for 3C industry , automotive and aircraft industry.

     

    /product/25/

Trade Shows

News

Copyright © PVT (Harbin) Coating Co.,Ltd       Powered by  www.300.cn Harbin          黑ICP备14000285号